Biopsy needles
Biopsy needles to customer drawings, with Chiba, trocar, Franseen and other tip geometries, in various gauges and lengths.
Request the data sheet →TRADE FAIRS AND EVENTS
Book a meeting at the fairSee you at the fairs
MEDICA 2026· Messe Düsseldorf (Germany)· 16–17 November 2026Circular Medical Expo – Innovation for Global Health· Padova Fiere (Italy)· 1–2 December 2026
MEDICAL DEVICE MANUFACTURER · ITALY · ROMANIA
Biopsy needles and stainless steel components, made in Italy
We manufacture needles, cannulas and tubes to customer drawings, with contract manufacturing and full lot traceability.
01 / 24Closed tip with side window
Closed-tip tubes with a side window, made to customer drawings.
02 / 24Lancet tip
Bevel with side facets, precision ground.
03 / 24Tru-Cut / guillotine needle
Cutting needle with specimen notch and cutting cannula.
04 / 24T-handle needle
Stainless steel cannula with overmoulded handle.
05 / 24Crown tip
Cutting crown for collecting tissue cores.
06 / 24Stylets with bevel tip
Solid stainless steel stylets with ground tip.
07 / 24Needle with stylet
Cannula and stylet with aligned tips and machined notch.
08 / 24Bevelled tips
Sharp bevel with a uniform finish.
09 / 24Bevelled cannulas
Ground bevel, repeatable lot after lot.
10 / 24Graduated cannula
Centimetre marking and tip grinding on a stainless steel cannula.
11 / 24Bevel tip
Precision tip grinding, repeatable lot after lot.
12 / 24Needle with stylet and handle
Moulded plastic handle with removable stylet.
13 / 24Tapered cannula
Conical reduction and ground tip on a thin cannula.
14 / 24Sandblasted zone
Localised sandblasting of the cannula, to customer specification.
15 / 24Bevel close-up
Long ground bevel with a uniform surface.
16 / 24Pencil-point tips
Pencil-point stylets, produced in series.
17 / 24Stainless steel hubs
Stainless steel components to customer drawings.
18 / 24Cannula with trocar stylet
Three-faceted trocar stylet, matched to the cannula.
19 / 24Graduated trocar stylet
Three-faceted tip on a graduated stylet.
20 / 24Semi-automatic biopsy needle
Complete device with graduated cannula and handle.
21 / 24Needle with Luer hub
Cannula welded to the hub, ready for assembly.
22 / 24Round-tip rods
Stainless steel rods with a rounded end.
23 / 24Induction-welded hubs
Luer hubs induction-welded onto stainless steel cannulas.
24 / 24Bevel in detail
Close-up of the inner lumen and bevel.
Made in Italy
To customer drawings
Lot traceability
ISO 13485 certification in progress
PRODUCTS
What we make
CONTRACT MANUFACTURING
From stainless steel tube to finished device
A complete cycle, one partner. Entrust us with a single step or the whole process, from tube cutting to sterilisation, with every lot traced and shipped with a delivery note.
01
Cutting
Cutting medical-grade stainless steel tubes and cannulas to length, with consistent lengths and clean, burr-free edges.
Diameter 0.4 to 4.5 mm · length 4 to 700 mm · tolerance 0.2 mm
02
Ultrasonic cleaning
Ultrasonic cleaning of components to remove oils and cutting residues before further processing.
03
Precision tip machining
Precision tips made to your drawing: Chiba, triple bevel, guillotine, pencil point and other geometries. Sharp, repeatable tips, lot after lot.
04
Electroplating treatments
Electroplating treatments of metal components.
05
Sandblasting
Controlled surface finishing with aluminium oxide or glass beads, for a uniform surface.
06
Centimetre marking
Clear, durable centimetre marking on cannulas, so insertion depth can be read reliably.
07
Tapering
Conical reduction of the tube end, for hubs, stylets and precise fits.
08
Induction welding
Clean, localised induction welding of metal components for strong, repeatable joints.
09
Vertical injection moulding
Using vertical injection presses, we overmould the plastic hub or handle directly onto the cannula.
10
Cleanroom assembly
Device assembly in a controlled environment, with lot traceability on every delivery.
11
Pouching
Packing devices in sealed, labelled pouches, ready for sterilisation.
12
Sterilisation
Sterilisation of packaged devices with ethylene oxide (EtO).
How we work
01
Drawing
You send us the technical drawing or a sample.
02
Sample
We make the first parts for your approval.
03
Production
We produce the series with inspection and lot records.
04
Delivery
We ship with a delivery note and a QR code to download the document.
05
Invoicing
We issue the electronic invoice once delivery is complete.
TIP GEOMETRIES
The tips we make
Some of the most requested geometries. We make the tip to your technical drawing, with bevel angles and lengths repeatable from lot to lot.
QUALITY
Every part is traced, from material to delivery
Incoming inspection
Every incoming material is checked and recorded.
Lot traceability
Lot shown on every delivery note, with a QR code to download the document.
Quality system
Management system according to ISO 13485, certification in progress.
ISO
13485
CERTIFICATION
ISO 13485 certification in progress
Our medical device quality management system is developed according to ISO 13485:2016 and is in the process of certification.
For information on the certification status: office@allbiopsy.com
TWO SITES
Italy and Romania
All Biopsy Italia S.r.l.
Operational site: Via Lavacchi 1592/C, 41038 San Felice sul Panaro (MO)
Registered office: Via Giovanni Boccaccio 11, 41037 Mirandola (MO)
VAT IT04137360360
+39 392 982 7534
All Biopsy S.R.L. – România
Str. Aeroportului nr. 1, Salcea, Suceava County
+40 740 703 777
